1502 pressure transducer

1502 pressure transducer generally refers to 1502 hammer union pressure sensor, often used in the oilfield , with the characteristics of high precision, impact resistance, corrosion prevention, high pressure resistance. Before we know about 1502 union pressure transducer, let's know what 1502 union is first .

What is 1502 union connection ?

IF the label is three digits, the first signs working pressure. Four digits, the top two digits indicate work pressure. The latter two digits all indicate the type and sealing mode of the union’s contact surface. 00 For taper surface, metal contact bee; 02 for taper surface, rubber pad seal; 03 for male head (Male sub with nut cap) taper surface with "O" ring groove and "O" ring seal. 1002 means the Working pressure is 10000psi, 02 represents buckle type; 1502 means working pressure is 15000PSI. Petroleum equipment high-pressure pipe sink generally use 1002,1502,1003 and other specifications by the union , the size of the union includes 2 inches, 3 inches, 4 inches, etc.

PPM-T293A and Viatran 511 are typical 1502 hammer union pressure sensors. They are widely used in fracturing trucks and oilfield risers. Most fracturing vehicles are equipped with Viatran 511 1502 pressure transducer. Since the 1502 pressure sensor is easy to break down, considering the cost and stability, most is replaced by PPM-T293A 1502 pressure transducer.

Viatran 511 hammer union pressure sensor

4-20 mA output, 2 " 1502 interface and License for application in dangerous situations

511 is Viatran advanced hammer union pressure sensor developed directly to site requirements. An electrical sub-route calibrator that calibrates and tracks pressure peaks through the HART ® Communicator or DevCom2000-Lite software, has a robust housing protected, protected against vibration and strong impact, and thus works properly under harsh conditions.

Parameters

PPM-T293A hammer union pressure sensor

4-20 mA output, 2 " 1502 interface and License for application in dangerous situations

PPM-T293A is a 1502 hammer union pressure sensor specially designed for the oilfield , developed by Changsha Taihe Electronic Equipment Co., Ltd. Fully welded integrated design, the sensor diaphragm and processed from the siren parts into a sealed unit, reduce the chance of medium leakage to the electronic components, and improve the overall resistance. With strong fatigue resistance, explosion-proof and vibration resistance characteristics. Horizontal or vertical direction fast field installation, and with the field calibration function, very easy to use.

Parameters

Changsha Taihe Electronic Equipment Co., Ltd. is a manufacturer focusing on high-precision research and development of pressure sensors, which has a history of 42 years.It has accumulated rich experience and technology in the pressure measurement of oilfields, natural gas and wind energy development fields, and the sensors maintain accurate and stable signal output in harsh environments.